Sample for Keith to review. Draft advice copy. Replace or approve before going live.

HMI

When a P5 HMI is the right upgrade

30 August 2026

Sample article for review. Text-only operator panels fail, go obsolete, or simply become too cramped once a machine has recipes and alarms. If the Fatek PLC program is proven, keep it and change the screen.

P5043N and P5043SA

The P5 4.3 inch range is the usual first step. P5043N and P5043SA are programmed in FvDesigner and talk to the existing Fatek PLC over serial. Recipe and alarm pages replace old key sequences without rewriting the ladder.

Take a programming cable

A USBA-MINIB-180 USB cable lets the builder adjust screens on site. Clone the HMI project onto the next similar machine rather than starting from a blank panel each time.

Send Rosehill the PLC port type and the pages you need (alarms, setpoints, recipes) and we will point at the matching P5 and cable.

← All articles