Sample for Keith to review. Draft advice copy. Replace or approve before going live.

Control

PID in the PLC, or a separate temperature controller?

16 August 2026

Sample article for review. Ovens, seal bars and small process skids often arrive with a separate temperature controller for each zone. It works until the operator wants one HMI page, or a fault needs to stop the conveyor as well as the heater.

When standalone is still fine

A single-zone bench oven with no other interlocking can stay on an instrument. There is no benefit in moving PID into the PLC if nothing else in the panel needs the temperature value.

When to run PID in Fatek

Use an FBs advanced main unit plus a thermocouple module such as FBs-2A4TC when you have more than one zone, or when setpoints and alarms belong on the same P5 HMI as the rest of the machine. PID instructions run in the PLC; bakers or operators adjust each zone without opening the panel.

If you already have thermocouple type and zone count, send them with the enquiry. That is enough for Rosehill to say whether the temperature module and HMI will fit the job.

← All articles